Random good picture Not show

(1) An heat analysis of each heat of steel shall be made by steel manufacturer.

(2) By using the heat analysis module of ANSYS code, the 3D temperature field of the floating tile was calculated.

(3) Heat analysis—the chemical analysis determined by the steel producer as being representative of a specific heat of steel.

(4) Heat analysis is an effective method of studying clay minerals.

(5) Cast analysis— Deprecated term. Use the preferred term heat analysis.

(6) By means of CDR-4P difference heat analysis instrument to carry out DSC examination for different dry-lubricant.

(7) The heat analysis of binary current leads which consist of copper current lead and high temperature super conducting was made on condition that the lead was cooled by two-stage refrigerator.

(8) The calculation of adiabatic flash was simplified with a heat analysis.

(9) The volatile properties of several broadleaf species and Pinus Massoniana were analyzed by a difference - heat analysis.

(10) Systematic research on the distributing instance of rubbing heat of a car friction plate was carried through by using the heat analysis theory and the finite element method.

(11) The heat transfer function is derived on the basis of the heat analysis. The relations between pyroelectric current and sensitive area as well as modulation frequency are analysed.

(12) It's influence on the properties of anhydride cured epoxy resin was studied by scanning electron microscope, heat analysis(Sentence dictionary), limiting oxygen index determination and other methods.

(13) In this paper, effects of the geometry of nozzles and the major factors involved in heat analysis were considered.

(14) Diffusion bonding crystal has been demonstrated to be an effective method to relieve the thermal lensing theoretically based on the numerical heat analysis to the end-pumped anisotropic laser crystal.

(15) Finally the melting temperature ranges of different components in the sample are tested by a differential heat analysis scanner (DSC).

(16) And then, we confirm the external conditions of finite element heat analysis after analyzing the cooling ways of multiple magnetic circuit transformers.

(17) The pore nucleation and growth of porous materials by hydrogen-metal eutectic growth for upward directional solidification were studied by heat analysis method.

(18) This paper discusses the influence of the design mode on insulation system including solid insulation and insulation liquid, and carries out the heat analysis of winding and oil duct.

(19) The conventional iron loss calculation is based on empirical formula and the work about temperature analysis especially transient heat analysis is not enough domestic.